PRL Complete Glazing Solutions

Loading

Storefront Glass Protection: What to Check Before an Upgrade

Home / BLOG / Storefront Glass Protection: What to Check Before an Upgrade

You may be able to upgrade storefront glass without replacing the frame or door. Before ordering new glass, have a glazing contractor confirm that the existing frame can support and retain it. If your project calls for tested resistance to forced entry, check that the documentation applies to the assembly you plan to install.

That assessment can help you decide whether to replace the display glass, upgrade the entrance, or specify a new storefront.

The interlayer in laminated glass helps hold fragments together after a break. Whether the pane stays in place also depends on how the frame holds it.

What Kind of Protection Does Your Storefront Need?

Whether you’re dealing with recurring vandalism or planning for potential damage during civil unrest, start with what you want the upgrade to do. Protecting the glass from scratches calls for a different approach than meeting a forced-entry requirement.

  • Scratches and graffiti: If vandalism mainly affects the surface, consider how the glass will be protected, cleaned, or restored after damage.
  • Glass breakage: If you want to limit loose fragments after a break, consider laminated glass. Its interlayer helps hold fragments together. Whether the broken pane stays in the opening also depends on how it is held in the frame.
  • Forced entry: If the project requires tested resistance to forced entry, identify the test method, the required result, and the openings that must meet it before choosing a product.

When to Replace the Glass, the Door, or the Full Storefront

Mark the parts you plan to keep on a drawing or photo. The scope depends on what the existing storefront can accommodate and where the added protection is needed.

What you plan to replace

What to check first

Display glass

The glass thickness and weight the existing frame can accommodate

Entrance

How the new door and frame will connect to the fixed storefront framing

Full storefront

Which fixed panels and doors need to meet the project’s protection requirements

Replace the Glass and Keep the Frame

For a retail renovation in Los Angeles or New York City, keeping sound aluminum framing can help preserve the storefront’s appearance. Ask the glazing contractor to identify the framing system and inspect its condition before specifying replacement glass.

If you’re considering laminated glass, check the glazing pocket, the blocks that support the pane, and the way the frame holds the glass in place. A pane can fit the opening and still be too thick or heavy for the existing system.

Upgrade the Commercial Entrance

If you’re updating a street-level shop in Chicago or Philadelphia and keeping its display windows, check how the new entrance will tie into the existing frame. Review the door, frame, glass, and hardware together, including how the door will operate and what the project requires for accessibility and emergency egress.

PRL’s aluminum entrance door options include Battle Door. The Battle Door specification sheet documents hurricane testing for a specific single outswing configuration. Those results address windborne debris and cyclic pressure. Verify forced-entry performance separately if the project requires it.

Replace the Full Storefront

If a renovation in Seattle or Portland changes both the entrance and the display windows, show them together on the same elevation drawing. Include the panel widths, door location, and connections to the surrounding wall so the project team can review the whole opening.

PRL’s commercial storefront systems can be configured with compatible glazing, doors, and hardware. Glass options vary by framing series, so confirm which series can accommodate the proposed glass before finalizing the layout.

The display windows can stay while the entrance gets an upgrade. Review the new door and hardware alongside the framing you plan to keep.

How to Read a Forced-Entry Test Report

Safety glazing tests address injury from accidental human impact. To evaluate resistance to forced entry, look for a report that covers that performance. ASTM F1233 is one test method for security glazing materials and systems. The report tells you what was tested and how it performed.

Ask for the test method and edition, the assembly or material tested, and the result. Compare the tested configuration with the proposed glass, framing, and installation details. For a door, check which hardware the test included. If the requirement also applies to adjacent fixed glass, verify whether the report covers it or whether it needs separate documentation.

Request a Quote for Your Storefront Upgrade

Share the project address, opening dimensions, and storefront photos or drawings with PRL. Mark the framing and glass you plan to keep. If the entrance will change, include the door swing and any hardware requirements. If the project has a security specification, send it with the request.

Contact PRL Glass & Aluminum to review glazing, entrance, or storefront options for your project.