Two suppliers can quote the same storefront system and leave different work to the installer. Before you request a quote, identify which companies can supply the systems your commercial project needs. Ask what each company fabricates in-house, what it sources from other suppliers, and what work your team will need to handle.
Who Actually Fabricates the System?
A manufacturer performs some or all of the fabrication work for the system it offers. A distributor sells products from one or more manufacturers and may coordinate the order with them. In either case, ask who makes the main components and who will answer technical questions.
What to verify | What to ask | What to request |
Who makes the components | Which components do you fabricate in-house, and which do you buy from other suppliers or have fabricated elsewhere? | Written confirmation of who fabricates the frame, door, and other main components. |
What you will receive | Will you deliver uncut aluminum profiles, cut components, or an assembled system? Are glass and hardware included? | A written quote listing what will be delivered and what work falls to your team or installer. |
Who checks compatibility | Who confirms that the frame, glass, door, and hardware are compatible? | The name and contact details of the person responsible for confirming compatibility. |
At PRL, we fabricate storefront framing and entrance doors in-house. We also supply aluminum profiles in stock lengths for shop fabrication. If you request stock lengths, confirm who will cut the profiles and fabricate the frame. If you request a complete system, check which glass, hardware, and fabrication work the quote includes.
Which Systems Can the Manufacturer Supply for Your Project?
Use the questions that apply to the systems shown in your drawings.
System | What to ask |
Storefront | Which framing series do you propose? Can you include a compatible entrance in the same quote? |
Curtain wall | Which curtain wall series do you propose for the façade? What documentation is available for that configuration? |
Commercial entrances | Can you fabricate the door and frame to the project dimensions? Can you supply the hardware specified in the drawings? |
Windows | Which fixed and operable configurations do you offer? What glass types and thicknesses does each configuration accommodate? |
Architectural glass | Can you supply glass in the make-up and dimensions shown in the drawings? |
If an entrance requires a custom-sized door, send the width and height of the opening where the frame will be installed. Specify whether the door should swing inward or outward, and share the finish code if you have it. Ask whether the manufacturer can quote the door and frame and which dimensions need to be verified on site before fabrication.
What Documents and Technical Support Can You Request?
When comparing quotes, check which documents describe the product series and which will be prepared for your project. Ask what information the manufacturer still needs before fabrication can begin.
- Technical data sheet. Check that it covers the series listed in the quote. If the sheet shows several configurations, ask the manufacturer to identify the one it has quoted for your project.
- Shop drawings. If included in the quote, shop drawings show the proposed system for your project, including its dimensions and the location of key components. Confirm who will prepare and review the drawings, who will verify dimensions on site, and when those measurements are needed.
- Installation manual. Ask for the manual for the quoted series and a technical contact the installer can reach with questions about the proposed configuration. For example, PRL publishes the technical data sheet and installation manual for its 250 DT storefront series.
Production lead time and delivery date. Ask what must be confirmed before fabrication can begin, how long production is expected to take, and when the order is expected to reach the jobsite. Compare that delivery date with your installation schedule.
Checklist for Shortlisting Manufacturers
- Which components does the company fabricate in-house, and which does it source or have fabricated elsewhere?
- Which systems shown in my drawings can the company quote?
- What does the quote include, and what work will my team or installer need to handle?
- What technical data sheets, shop drawings, or samples can the company provide, and when?
- Who verifies dimensions on site, and who answers technical questions?
- What needs to be confirmed before fabrication can begin? What are the estimated production lead time and jobsite delivery date?
Share your drawings or opening schedule with PRL, along with the systems you need and your target jobsite delivery date. We’ll confirm what we can fabricate and supply and let you know what else we need to prepare a quote.


