Loading
The PL-8 is similar to the PL-3 but is a push/pull handle combination. The “pull side” is a straight offset vertical handle with a horizontal bar on the “push side” of the door.
1″ diameter tubing handle
Requires 5/8″ holes on glass
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 3 LBS |
The PL-8 is similar to the PL-3 but is a Push/Pull handle combination. The “pull side” is a straight or offset vertical handle with a horizontal bar on the “push side” of the door.
1” diameter tubing handle
Requires 5/8” holes on glass
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 3 LBS |
1” diameter tubing handle
Requires 5/8” holes on glass
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 3 LBS |
1” diameter tubing handle
Requires 5/8” holes on glass
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 3 LBS |
Very popular on our all commercial glass doors for designers looking for a more dynamic commercial door handle appearance is our PL-Ladder style pull. It has become a favorite for architects and builders alike.
1-1/4″ tubing diameter
Ladder pull back to back
Requires 5/8” holes on glass
72″ over all
60″ center to center
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 16 LBS |
Very popular on our all commercial glass doors for designers looking for a more dynamic commercial door handle appearance is our PL-Ladder style pull. It has become a favorite for architects and builders alike.
1-1/4″ tubing diameter
Ladder pull back to back
Requires 5/8” holes on glass
72″ over all
60″ center to center
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 14 LBS |
