PL150 DRY-SIDELITE RAIL SATIN BRASS @120″
| Finish | SATIN BRASS |
| Glazing Set | DRY SET |
| Material | ALUMINUM |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | ALUMINUM |
| Weight | 3 LBS PER LINEAR FOOT |
PL-8 PUSH/PULL 12X28 #8 POL S/S
The PL-8 is similar to the PL-3 but is a Push/Pull handle combination. The “pull side” is a straight or offset vertical handle with a horizontal bar on the “push side” of the door. The PL-8 Push/Pull handle combination is available in 10”x 28” or 12”x28”.
1” diameter tubing handle requires 5/8” holes on glass
| Finish | #8 POLISHED STAINLESS STEEL |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 4 LBS |
PL-8 PUSH/PULL 12X28 BRUSHED S/S
The PL-8 is similar to the PL-3 but is a Push/Pull handle combination. The “pull side” is a straight or offset vertical handle with a horizontal bar on the “push side” of the door. The PL-8 Push/Pull handle combination is available in 10”x 28” or 12”x28”.
1” diameter tubing handle requires 5/8” holes on glass
| Finish | #4 BRUSHED STAINLESS STEEL |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 4 LBS |
PL-8 PUSH/PULL 12X28 BRZ ANOD
The PL-8 is similar to the PL-3 but is a Push/Pull handle combination. The “pull side” is a straight or offset vertical handle with a horizontal bar on the “push side” of the door. The PL-8 Push/Pull handle combination is available in 10”x 28” or 12”x28”.
1” diameter tubing handle requires 5/8” holes on glass
| Finish | BRONZE ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 4 LBS |
PL-8 PUSH/PULL 12X28 CLR ANOD
The PL-8 is similar to the PL-3 but is a Push/Pull handle combination. The “pull side” is a straight or offset vertical handle with a horizontal bar on the “push side” of the door. The PL-8 Push/Pull handle combination is available in 10”x 28” or 12”x28”.
1” diameter tubing handle requires 5/8” holes on glass
| Finish | CLEAR ANODIZE |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Thickness | 3/8″, 1/2″ & 3/4″ GLASS |
| Material | BRASS OR STAINLESS STEEL TUBING |
| Weight | 4 LBS |